Super Air Wipe 1/2" - 4", Stainless steel, 1/4" BSP, with shim set
Corrosion and heat-resistant ring nozzle Super Air Wipe made of stainless steel available in sizes between 1/2" and 4" or 13 mm and 102 mm. Even 360 ° air flow for blowing, drying, cleaning and cooling, without electricity or moving parts. The blowing force and air flow can be adjusted.
The Super Air Wipe is ideal for the economical blowing off of pipes, cables, hoses and extruded forms with low air consumption and a low noise level. The ring nozzle is divisible and therefore very easy to assemble. The Super Air Wipe is equipped with a .002 “(0.05 mm) thick spacer film (SHIM SET). Stainless steel versions can be used up to 427°C (800°F).
All versions have stainless steel screws and spacer foils. Up to a size of 4’ (102 mm), a stainless steel hose distributes the air evenly over the entire ring. Variants from 5’ (127 mm) have a direct compressed air connection on both halves to ensure a uniform air flow for large diameters.
Typical applications are:
- drying after washing
- cleaning, electroplating or coating
- blowing off dust and dirt
- Cooling down hot extruded molds
- Uniform drying of surfaces
- Eliminates solution transfer, no cross-contamination.
- Eliminates unnecessary coatings, water and oil.
- Minimizing the loss of solution due to dragging out.
- Dries printed or inked surfaces.
- Ideal for pipes, cables, extruded products, wires, rods and hoses.
- Blow excess water off vehicle door seals.
- Dries pipes, hoses, wires, fiberglass.
- Cleans the tips of spray guns.
- Cleans seals and tapes
Size | Aluminium Model |
Stainless Steel Model |
3/8" (9.5 mm) | BP2399 | - |
1/2" (13 mm) | BP2400 | BP2400SS |
1" (25 mm) |
BP2401 |
BP2401SS |
2" (51 mm) |
BP2402 |
BP2402SS |
3" (76 mm) |
BP2403 | BP2403SS |
4" (102 mm) | BP2404 | BP2404SS |
5" (127 mm) | BP2405 | on request |
6" (102 mm) | BP2406 |
on request |
7" (102 mm) | BP2407 | on request |
9" (102 mm) | BP2409 | on request |
11" (102 mm) | BP2411 | on request |