RIKO 700/2x90 - 960/2x90 Stationary Piston Compressor for Industry 4.0-5.5 kW, 10 bar, 2x90 l
Product number:
4054020
RIKO 700/2x90 and 960/2x90, stationary piston compressor with refrigeration dryer option, 4.0 kW or 5.5 kW for industrial applications, 10 bar, TÜV and ZÜS free, on galvanized 2x90 l compressed air tanks.
Very powerful industrial piston compressor with 2 horizontal 90 liter compressed air tanks, galvanized and manufactured according to AD2000 guidelines. Optionally with refrigerant dryer. A maximum pressure of 10 bar is generated via a belt drive with a 4.0 or 5.5 kW unit (nominal power) depending on the model. The suction capacity is 700 - 960 l/min depending on the model.
Equipped as standard with check valve, safety valve, motor protection switch, pressure gauge, relief valve (for 4.0 kW nominal power), solenoid valve with silencer (at 5.5 kW nominal power), ball valve for tank drainage, vibration damper, Condor pressure switch incl. operating hours counter. Certification before commissioning (TÜV and ZÜS-free).
* acc. to DIN EN ISO 2151:2009
You can find further features under the "Technical data" tab and in the product data sheet under "Downloads".
Very powerful industrial piston compressor with 2 horizontal 90 liter compressed air tanks, galvanized and manufactured according to AD2000 guidelines. Optionally with refrigerant dryer. A maximum pressure of 10 bar is generated via a belt drive with a 4.0 or 5.5 kW unit (nominal power) depending on the model. The suction capacity is 700 - 960 l/min depending on the model.
Equipped as standard with check valve, safety valve, motor protection switch, pressure gauge, relief valve (for 4.0 kW nominal power), solenoid valve with silencer (at 5.5 kW nominal power), ball valve for tank drainage, vibration damper, Condor pressure switch incl. operating hours counter. Certification before commissioning (TÜV and ZÜS-free).
Advantages of the Renner RIKO series:
- Long service life and low wear due to galvanized tanks and low rotational speeds
- Maintenance-friendly design with easily accessible condensate drain valve
- Low noise and vibration due to low speeds
- Safety as standard - tank manufactured according to AD2000 guidelines, adjusted pressure switch and safety valve mounted ready for operation
- Generously dimensioned intercoolers and aftercoolers: an efficient cooling air system ensures a low inlet temperature of the compressed air into the air receiver
- User-friendly due to fully automatic control via pressure switch with motor protection switch and relief valve
- Accurate recording of compressor operating times and maintenance intervals through integrated operating hours counter
Models:
- RIKO 700/2x90
- RIKO 700/2x90 KT (with refrigeration dryer)
- RIKO 960/2x90 O (without star-delta starter)
- RIKO 960/2x90 O-KT (without star-delta starter, with refrigeration dryer)
- RIKO 960/2x90
- RIKO 960/2x90 KT (with refrigeration dryer)
Performance Data:
- Suction volume: 700 - 960 l/min
- Capacity (acc. to VDMA 4362): 570 - 740 l/min
- Nominal motor power: 4.0 or 5.5 kW
- Voltage: 400 V
- Maximum pressure: 10 bar
- Cylinder/Stages: 2/2
- Speed Motor: 940 - 1150 U/min
- Sound level*: 78 - 79 dB(A)
- Compressed air tank (AD 2000): 2x90 liters, horizontal
- Weight: 201 - 259 kg
* acc. to DIN EN ISO 2151:2009
You can find further features under the "Technical data" tab and in the product data sheet under "Downloads".
